Hi Guys
I've taken the plunge and started playing with Realdraw Pro and Screen 4 to make a new set of screen for turn
![Shocked :o](https://www.machsupport.com/forum/Smileys/default/shocked.gif)
Anyhow a couple of things. Firstly, I have a button in the jpg in the centre, this is surrounded by a transparent PNG. When you click the blank image button the outer border of the button changes colour via the png. I notice that if you put an 'empty' image button over the JPG it is totally transparent. Similalry the first state of the PNG is also transparent, but when you click the button, the bit of the png covered by the image button remains in the first state. Is there any way around this or do I have to live with a smaller button inside the frame?
Secondly I have setup the above button for the spindle. When I click it the first time the border goes green, second click back to orange, third click remains orange, fourth click to green, fifth click to orange etc. Why do I always need to click twice in the orange state? I am using M3 to turn on the spindle and OEMcode 11 for the LED.
Cheers
Dave