Hi Art / Brian
I have asked this in the past, and the answer was 'Not at the moment'.
So
Is there a way now that I can read the data from the offset table using VB.
If there is no Mach command, can we PLEASE have a Offset-read and an Offset-write command.
It would be nice to be able to do :-
len = Read_Offset(no,0)
dia = Read_Offset(no,1)
lwear = Read_Offset(no,2)
dwear = Read_Offset(no,3)
and
Write_Offset(no,len,dia,lwear,dwear)
Thanks
Graham.