Hello Guest it is March 28, 2024, 04:12:56 AM

Author Topic: L Cam Pro Plasma post-code correction  (Read 2834 times)

0 Members and 1 Guest are viewing this topic.

Offline Tekno

*
  •  24 24
  • http://www.teknoelektronik.com
    • View Profile
    • teknoelektronik web site turkiye istanbul
L Cam Pro Plasma post-code correction
« on: April 04, 2011, 09:46:23 AM »
Hi
Dear Brian Barker

Plasma Post  inadequate or missing
for plasma post I wrote a macro (M29.M1s)
need to be added Plasma Default post
good performance with this macro

standart code

N5 (File Name = Graphic1 on Monday, April 04, 2011)
N10 (Default Plasma Post)
N15  G91.1
N20 G0  Z15.0000
N25 G0  X0.0000  Y0.0000
N30 G28.1 (Probe for Stock)
N35 G0  Z5.1000
N40 M3(PLasma On)
N45 G4 P2.5000
N50 G1  Z3.1000  F250.00
N55  Y39.4992  F800.00
N60  X41.5248
N65  Y0.0000
N70  X0.0000
N75 G4P0.20
N80 M5 (Plasma Off)
N180 G0 Z15.0000
N185 G0  X0.0000  Y0.0000
N190 M30




should be

N5 (File Name = Graphic1 on Monday, April 04, 2011)
N10 (Default Plasma Post)
N15  G91.1
N20 G0  Z15.0000
N25 G0  X0.0000  Y0.0000
N30 G28.1 (Probe for Stock)
N31 M29 (For Z height check)
N35 G0  Z5.1000
N40 M3(PLasma On)
N45 G4 P2.5000
N50 G1  Z3.1000  F250.00
N55  Y39.4992  F800.00
N60  X41.5248
N65  Y0.0000
N70  X0.0000
N75 G4P0.20
N80 M5 (Plasma Off)
N85 G0 Z15.0000
N90 G0  X0.0000  Y0.0000
N95 M30

Stepmotor Stepmotordriver Torch Height control
Plasma machine build   step& servo Controls
THC design  PCparallelport breakoutboard
Plasma Application, Mach3 torch height control
USB Pentant Usb control  breakoutboard
Foam Cutter Machines