Hi Guys and Gals,
I have a 3 axis mill with all limits and home switches wired to separate inputs on my BOB. Yep nine inputs.
I Set up the mill b4 I had Mach running and wired the limits this way because it lets you safely jog off a limit without disabling the limit, and it's normal practice here at work for motion control systems. ( would be great if I could replicate this in Mach as well)
Is it possible to edit the homing routine (DoButton24 etc) to leave the limit inputs enabled during the home all sequence.
My home positions are 20mm inside the closest limit and if I inadvertently home from within that space the limits are of no use at all, the mill will drive to the end stops and stall the steppers.
I understand why Mach is set up this way, I just want to keep the fail safe features that I have implemented enabled during home.
Cheers,
Phil