Hello Guest it is March 28, 2024, 04:34:47 PM

Author Topic: need help with calculating the mechanical drive  (Read 3274 times)

0 Members and 1 Guest are viewing this topic.

need help with calculating the mechanical drive
« on: March 27, 2011, 05:49:21 PM »
I am working on my rebuilt cnc mill, how can i calculate the setting for motor tuning.

the stepper motor has a gear 18:30 I don't know the thread of the spindle on the X axis.
We did some test runs and came on a figure of 1375 for 75mm I can't explane this outcome I missing 0.10mm with this out come

Is there anyone how can help me to get things done????

Gr. Jord  ??? ??? ???

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: need help with calculating the mechanical drive
« Reply #1 on: March 27, 2011, 05:53:19 PM »
You could use the SetSteps per Unit button on the settings page (just above the reset button). Personally I prefer calculating the numbers but as long as your measurements are accurate when using the Set Steps per Unit button then you should be close.
Hood
Re: need help with calculating the mechanical drive
« Reply #2 on: March 27, 2011, 05:56:21 PM »
one moment i am looking for it.
thank for your quick response

gr. jord
Re: need help with calculating the mechanical drive
« Reply #3 on: March 27, 2011, 06:17:13 PM »
one moment i am looking for it.
thank for your quick response

gr. jord

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: need help with calculating the mechanical drive
« Reply #4 on: March 27, 2011, 06:21:28 PM »
See the scrrenshot below for the buttons location.
Hood
Re: need help with calculating the mechanical drive
« Reply #5 on: March 27, 2011, 07:10:10 PM »
thanks this will work I think, I will let you know if it's ready.
Going to bed it's 01:20 in the morning.
see you soon.

jord