Hello Guest it is September 17, 2019, 09:10:22 AM

Author Topic: How to see DRO A-axis on mach screen ?  (Read 1967 times)

0 Members and 1 Guest are viewing this topic.

How to see DRO A-axis on mach screen ?
« on: March 10, 2011, 03:01:48 AM »
 Dear Sir,
  I need the help.  I can see  DRO's of X,Y and Z-axis on mach screen by now.
 I want to use the A-axis and need it to show DRO's of A-axis on mach screen. How to set up ?

 Hope your help
  Mongkol

Offline Tweakie.CNC

*
  • *
  •  7,905 7,905
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: How to see DRO A-axis on mach screen ?
« Reply #1 on: March 10, 2011, 03:09:20 AM »
Don't know if this helps but the A Axis DRO is shown as Axis 4 on my screen.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: How to see DRO A-axis on mach screen ?
« Reply #2 on: March 10, 2011, 03:13:57 AM »
Tweakie,
 Thanks for the reply.
If I need A,B and C axis as well. Total 6 axis. ( X,Y,Z,A,B and C .)
How to set up to show DRO's all axis on mach screen ?

Pls help
Mongkol

Offline Tweakie.CNC

*
  • *
  •  7,905 7,905
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: How to see DRO A-axis on mach screen ?
« Reply #3 on: March 10, 2011, 03:24:58 AM »
There is a 6 axis screen .set  which may be suitable for your needs under the downloads section http://www.machsupport.com/screens.php

Failing that, you could design / build your own screen .set - the tools are available here, it is not too difficult.  :-\

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.