Hello Guest it is March 29, 2024, 07:01:26 AM

Author Topic: Sherline mill 5400 - Motors not moving the didstance Mach3 DRO shows  (Read 7621 times)

0 Members and 1 Guest are viewing this topic.

Offline sn96

*
  •  60 60
    • View Profile
Re: Sherline mill 5400 - Motors not moving the didstance Mach3 DRO shows
« Reply #10 on: March 06, 2011, 02:27:20 PM »
Ok, I found the information. I went to sherlines website and found this:

Motor Connectors:

∙ 5-pin DIN male
∙ Five to 30 volts (better performance at higher voltage)
∙ 2 amp unipolar configuration
∙ 800 steps per revolution (microstepping), equates to 16,000 steps/inch with .050" pitch leadscrew

so it is 16000 is what I need. I do have the sherline half step checked also.
Mike
________________________________
PM25mv with Arizona cnc conversion kit
windows 10
i7 laptop
mach3 demo latest version
stepperonline 566 ozin closed loop stepper 4.0 driver for x and y
stepperonline 1699 ozin closed loop stepper 4.0 driver for the z
amazon no name brand usb controller