Hello Guest it is April 19, 2024, 02:32:18 AM
Profile Guest
« previous next »
Pages: « 1 2 3 4   Go Down

Author Topic: Grease pump  (Read 12542 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Grease pump
« Reply #30 on: March 03, 2011, 02:14:29 PM »
Possibly because the On/Off/On state is faster than 10Hz? In other words, at 20m/min your axis is moving 333.333mm/second so 1/10 of a second it moves 33.333mm so if your screw hole is less than 33mm dia (very likely) then there is a good chance the brain will miss it.

Hood
« Last Edit: March 03, 2011, 02:21:11 PM by Hood »
Logged

Offline peter81

*
  • 104 104
    • View Profile
Re: Grease pump
« Reply #31 on: March 03, 2011, 02:37:47 PM »
So the switch must be ON for more than 0.1s and OFF for more than 0.1s to make the count?
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Grease pump
« Reply #32 on: March 03, 2011, 02:47:49 PM »
The brain has to see it, if the brain works at Machs update (10Hz)  then your on/off/on state is likely much shorter than 1/10th of a second so there is a good chance the brain will not see it.
Hood
Logged
Pages: « 1 2 3 4   Go Up
« previous next »