Hello Guest it is March 28, 2024, 03:05:51 PM

Author Topic: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade  (Read 23197 times)

0 Members and 1 Guest are viewing this topic.

Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #30 on: February 18, 2011, 07:37:05 AM »
What does fffb stand for,o little fat one?

Offline dresda

*
  •  220 220
    • View Profile
Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #31 on: February 18, 2011, 06:16:44 PM »
Sorry Piv, That was the old Fanuc spindle drive, I will ask my buddy see what he has.
Hood, No wonder you changed the control, Mark century, I know guys that have not only run a mile from those, they are still running...
Ray.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #32 on: February 18, 2011, 06:23:52 PM »
The manual can be downloaded from Mits site that Mark (Gridley51) posted a link to, seems to be quite a lot of good info in it.

Yes it looks kind of antiquated, did fire it up and got a couple of things running quite quickly but that was due to Mark being familiar with GE controls, more modern ones but still I would imagine the basics are similar.

Hood

Offline dresda

*
  •  220 220
    • View Profile
Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #33 on: February 18, 2011, 06:36:26 PM »
I would be impressed with Mitsubishi if you find your manual on there  site.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #34 on: February 18, 2011, 06:42:56 PM »
Are you meaning Piv's manual?

Hood

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #35 on: February 18, 2011, 06:51:48 PM »
See if this works, you have to have the time set for North America to get to the downloads page but a direct link should work fine without setting the time.

http://www.meau.com/functions/dms/getfile.asp?ID=010000000000000001000000458800000
Hood

Offline dresda

*
  •  220 220
    • View Profile
Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #36 on: February 18, 2011, 06:56:55 PM »
Oh, Wow, that's great..
Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #37 on: February 18, 2011, 08:36:55 PM »
Post some pics.... Should move to the machine builds section?

JH

Offline dresda

*
  •  220 220
    • View Profile
Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #38 on: February 20, 2011, 05:17:31 PM »
Piv, Do you a electrical drawings for your machine?  You know what the 22K is for, 30HP. I have drawings for DL-SCZ 18K-D (18.5 KW) 25hp.
Ray.

Offline piv

*
  •  91 91
    • View Profile
Re: Mori Seiki TL-5 TL5 Fanuc 2000 upgrade
« Reply #39 on: February 20, 2011, 07:19:56 PM »
Hood, Thanks for the link to the drive manual, it worked!    I did have a look before on the meau.com site, but didnt know about setting time zone to North America.  Thats going to make this conversion possible. Page 68 (connection diagram that actually matches what I have!) is gold. It looks like I have the option of in putting speed as a 12 bit digital input or as an analogue voltage. Thats nice.

Dresda, I guessed the 22K was for 22kW oe 30hp.  I dont have an electrical schematic for the machine.  Do you have one?  That would be a time saver too.  Otherwise its lots of wire tracing.

So now I feel like I can use the existing axis and spindle drives. My next step is to figure out the existing "PLC output" to the relays on the machine so I can work out what my new PLC output from the DSPMC will be.

Thanks everyone for your help.