Hello Guest it is March 28, 2024, 07:58:49 AM

Author Topic: Erratic machine behavior  (Read 7871 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Erratic machine behavior
« Reply #10 on: January 31, 2011, 03:29:50 PM »
Yes thats correct, set Step and Dir pulses to 5 and see.
Hood
Re: Erratic machine behavior
« Reply #11 on: January 31, 2011, 03:38:03 PM »
ok
got the motors running in the right direction now with the dir active. let me try it. 
Re: Erratic machine behavior
« Reply #12 on: January 31, 2011, 03:55:44 PM »
heyy looks like its working, now in English what did i or rather you do to make this happen

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Erratic machine behavior
« Reply #13 on: January 31, 2011, 04:05:06 PM »
LOL heck  if I know ;)

Hood

Re: Erratic machine behavior
« Reply #14 on: January 31, 2011, 04:36:28 PM »
hood
eureka moment has been put on hold, on the finish path it started digging down into the stock piece and tapered its way down, when i homed it in its of by about an inch Ill try to slow it down a bit,that last path was at about 50 ft/min
man i dont know whats going on.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Erratic machine behavior
« Reply #15 on: January 31, 2011, 04:38:23 PM »
Ok what do you have the kernel set to?
Hood
Re: Erratic machine behavior
« Reply #16 on: January 31, 2011, 04:43:43 PM »
25000zh
Re: Erratic machine behavior
« Reply #17 on: January 31, 2011, 04:45:01 PM »
btw how do you get instant messaging in this forum do. I have to go to my email and see your post there

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Erratic machine behavior
« Reply #18 on: January 31, 2011, 04:48:06 PM »
Ok try Sherline mode, it makes the pulse even wider but can only be used in 25KHz mode as the pulse is 40uS wide
Hood

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Erratic machine behavior
« Reply #19 on: January 31, 2011, 04:48:41 PM »
I just refresh the forum and I see any new posts.
Hood