Hello Guest it is May 18, 2024, 08:57:06 AM

Author Topic: Useing the tool libray  (Read 2519 times)

0 Members and 1 Guest are viewing this topic.

Useing the tool libray
« on: January 26, 2011, 04:18:06 PM »
I migh tbe doing some thing very wrong with my tool libray here. But can some one give me a simpel step by step guide on how to put tools in the libray as i seem to be doin gsome thing very wrong because when ever i do a tool change my Z is all ways way of the mark.

All so does any one know how well the Coventry easy change tool system repeats.

Cheers up front
Re: Useing the tool libray
« Reply #1 on: January 27, 2011, 07:12:42 PM »
Do you have a G43 in your program, you must if you want tool length compensation.

You also have to have a tool change sequence.

Like M6 T06

Look at this link, this is a tutorial from Syil about tool change in Mach3

Hope this help, Jeff