Hello Guest it is November 03, 2024, 02:25:58 PM

Author Topic: s curve control board  (Read 3806 times)

0 Members and 1 Guest are viewing this topic.

Offline Bill_O

*
  •  592 592
s curve control board
« on: January 19, 2011, 05:24:02 PM »
I need a control board that does s curves.
I am running 2 x axis servos. (Currently get same step and direction input), 1 y axis servo, 1 z axis servo, 1 rotary atc servo and spindle speed control.
Need some suggestions from anyone.

Thanks, Bill

Offline kf2qd

*
  •  157 157
Re: s curve control board
« Reply #1 on: January 20, 2011, 02:19:37 PM »
Why???

I have done some machine building and S-Curve accel is not always better.

Offline Bill_O

*
  •  592 592
Re: s curve control board
« Reply #2 on: January 20, 2011, 02:30:08 PM »
the gantry is almost 3000lbs
the head is 700lbs
it needs the s curve moves

bill

Offline BR549

*
  •  6,965 6,965
Re: s curve control board
« Reply #3 on: January 22, 2011, 02:23:40 PM »
Bill I think you are going to have to find a "controller" that does Scurve trajectory from the planner (Mach currently  does not).

(;-) TP

Offline Tweakie.CNC

*
  • *
  •  9,243 9,243
  • Super Kitty
Re: s curve control board
« Reply #4 on: January 23, 2011, 03:39:18 AM »
A lot of work was done on the acceleration curve and slope in the excellent Tempest Trajectory planner which now appears to be an abandoned project. Shame really because it was much faster at 2.5D work and allowed higher accelerations without stall on my router.

From reading other threads I think Bill_O is on to this already.

Tweakie.
PEACE