Hello Guest it is August 20, 2019, 10:46:52 AM

Author Topic: tool change  (Read 2190 times)

0 Members and 1 Guest are viewing this topic.

tool change
« on: January 08, 2011, 12:10:43 PM »
i am useing mach3 mill. when i do M6 T2 program stop and waiting for cycle start. it is ok but when i press cykle start spindle dont start. what is wrong?
sorry my bad english

Offline BR549

*
  •  6,886 6,886
    • View Profile
Re: tool change
« Reply #1 on: January 08, 2011, 12:16:30 PM »
A tool change normally does not restart the spindle. It is normally restarted via Gcode after the machine clears the tool change area .

YOU can alter the M6end macro to auto restart the spindle .

To the M6end add  DoSpinCW() to the end of the file.  Just remember it willl autostart the spindle EVEN if it is not where you want it to be(;-)

Hope that helps, (;-) TP

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: tool change
« Reply #2 on: January 08, 2011, 12:48:51 PM »
Yes, be careful with having the toolchange macro start the spindle.

I was doing that with my auto zero macro (as part of M6) UNTIL the spindle started unexpectedly.

At that point, I decided to let the g-code start the spindle.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: tool change
« Reply #3 on: January 08, 2011, 03:35:11 PM »
Hi,

Safer to write in your Gcode:-

T2 M06         (Tool change to tool 2)
G43 H2       (apply tool lenght offset if you have programmed the tool table)
M03 S1000 (turn spindle on and set speed)

ATB
Derek
You can "chop it off" but can't "chop it on"