Hello Guest it is March 29, 2024, 09:37:47 AM

Author Topic: Reversing steppers in Mach3  (Read 2557 times)

0 Members and 1 Guest are viewing this topic.

Reversing steppers in Mach3
« on: December 25, 2010, 08:35:19 PM »
Hi can anyone help me reverse the direction of motors without changing wiring. I did this once but can not rember how I did it old age is creeping in.
Thanks Jim

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Reversing steppers in Mach3
« Reply #1 on: December 25, 2010, 09:32:16 PM »
Config>Homing/Limits and check the "Reverse" box.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Reversing steppers in Mach3
« Reply #2 on: December 28, 2010, 04:24:27 PM »
Thanks Gerry
That saved a lot of time .
I am new to CNC routing and have just finished my first machine. It works fine now all I have to do is learn how to get the best out of it.
Thanks again
Jim