Hello Guest it is February 17, 2020, 08:10:42 PM

Author Topic: AUTO 0 Z-AXIS HELP ???  (Read 3652 times)

0 Members and 1 Guest are viewing this topic.

AUTO 0 Z-AXIS HELP ???
« on: February 16, 2011, 03:22:50 PM »
Can somebody help?  How to create auto 0 Z axis program in Mach3.  I am new in forum and just switch from shopbot to Mach3, I would like to have auto 0 z axis program as C2 file in shopbot controller I have been used for years.  All help would be appreciate,
Tom,
Re: AUTO 0 Z-AXIS HELP ???
« Reply #1 on: February 16, 2011, 04:04:51 PM »
Do you mean like a touch plate to set the work 0 ?
If so, do a search, there's gads and oodles of info and examples.
If not,  ? ? ? ? ?
Rc
Re: AUTO 0 Z-AXIS HELP ???
« Reply #2 on: February 16, 2011, 04:12:24 PM »
The program auto 0 Z-Axis.  What I want is, the Z-Axis come down touch metal plate (Grounded) then back up and go down again to touch plate and go back home.
Thank you for help,
Tom,
Re: AUTO 0 Z-AXIS HELP ???
« Reply #3 on: February 16, 2011, 04:31:33 PM »
Re: AUTO 0 Z-AXIS HELP ???
« Reply #4 on: February 16, 2011, 04:39:20 PM »
Re: AUTO 0 Z-AXIS HELP ???
« Reply #5 on: February 16, 2011, 05:09:01 PM »
Thank you very much for your help.  I will follow those links and start from there,
Tom,