Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: tomvision on February 16, 2011, 03:22:50 PM

Title: AUTO 0 Z-AXIS HELP ???
Post by: tomvision on February 16, 2011, 03:22:50 PM
Can somebody help?  How to create auto 0 Z axis program in Mach3.  I am new in forum and just switch from shopbot to Mach3, I would like to have auto 0 z axis program as C2 file in shopbot controller I have been used for years.  All help would be appreciate,
Tom,
Title: Re: AUTO 0 Z-AXIS HELP ???
Post by: Overloaded on February 16, 2011, 04:04:51 PM
Do you mean like a touch plate to set the work 0 ?
If so, do a search, there's gads and oodles of info and examples.
If not,  ? ? ? ? ?
Rc
Title: Re: AUTO 0 Z-AXIS HELP ???
Post by: tomvision on February 16, 2011, 04:12:24 PM
The program auto 0 Z-Axis.  What I want is, the Z-Axis come down touch metal plate (Grounded) then back up and go down again to touch plate and go back home.
Thank you for help,
Tom,
Title: Re: AUTO 0 Z-AXIS HELP ???
Post by: Overloaded on February 16, 2011, 04:31:33 PM
Tom,
  Here is one of many topics.
http://www.machsupport.com/forum/index.php/topic,12633.0.html
Title: Re: AUTO 0 Z-AXIS HELP ???
Post by: Overloaded on February 16, 2011, 04:39:20 PM
another good one,
http://www.machsupport.com/forum/index.php/topic,12980.0.html
Title: Re: AUTO 0 Z-AXIS HELP ???
Post by: tomvision on February 16, 2011, 05:09:01 PM
Thank you very much for your help.  I will follow those links and start from there,
Tom,
Title: Re: AUTO 0 Z-AXIS HELP ???
Post by: ger21 on February 16, 2011, 07:28:02 PM
http://www.cnczone.com/forums/cnc_wood_router_project_log/36099-another_aussie_auto_tool_zero.html

http://www.cnczone.com/forums/mach_wizards_macros_addons/100594-mach_3_tool_setter_big-tex.html