Hello
Guest
it is
April 27, 2024, 11:04:00 PM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
G-Code, CAD, and CAM
/
G-Code, CAD, and CAM discussions
/
g2 stops program when running
« previous
next »
Print
Pages:
1
2
»
Go Down
Author
Topic: g2 stops program when running (Read 5368 times)
0 Members and 1 Guest are viewing this topic.
Luslugger
6
g2 stops program when running
«
on:
November 28, 2010, 04:25:11 PM »
The n211 G2 line stops the feed. What is happening? How do I change?
The n36 g2 is a spiral. same questions?
Bob S
N211
G0G90G43G54X0.850Z1.0H21S1000
G0B0.0
G0Y0.0
M3M8
G1Z-.10F10.0
G1X.838F10.0
G2X.838Y0.0I-.838F20.0
G80M9
G0Z1.0
M5
N36(ENDMILL)
G0G90G43G54X0.0Z1.0H36T8S2000
G0B0.0
G0Y0.0
M3M8
G0Z.10
G1X.1885F30.0
G2X.1885Y0.0I-.1885Z-.558P3F20.0
G1X0.0F10.0
G1X.10F5.0
G3X.10Y0.0I-.10Z-.561P1F10.0
G3X.10Y0.0I-.10F15.0
G0X0.0
G0Z0.0
G1X.50F20.0
G3X.50Y0.0I-.50F30.0
G0X0.0
G0Z1.0
G80M9
M5
G28Y0.0X0.0
M6
G28Y0.0X0.0
M6
N36(ENDMILL)
Logged
ger21
6,295
Re: g2 stops program when running
«
Reply #1 on:
November 28, 2010, 04:38:47 PM »
Probably needs a J. Is there an error message?
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Luslugger
6
Re: g2 stops program when running
«
Reply #2 on:
November 28, 2010, 07:52:11 PM »
I added a J0.0 to the line. The code stopped at the same line.
Bob S
Logged
ger21
6,295
Re: g2 stops program when running
«
Reply #3 on:
November 28, 2010, 07:54:54 PM »
Is there an error message?
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
BR549
6,965
Re: g2 stops program when running
«
Reply #4 on:
November 28, 2010, 08:36:20 PM »
THe code runs here. It does not do anything constructive but it runs.
(;-) TP
Logged
Luslugger
6
Re: g2 stops program when running
«
Reply #5 on:
November 29, 2010, 08:36:29 AM »
What do you mean "does nothing"? My Mits m86 controllers have been running this code for years. I ran this code yesterday. I am trying to back plot the code I write by hand. Since I already own the Mach3 series, I prefer to use Mach3.
Bob S
Logged
Graham Waterworth
2,673
Yorkshire Dales, England
Re: g2 stops program when running
«
Reply #6 on:
November 29, 2010, 09:23:16 AM »
What is the P3 and P1 for in the G02/3 lines on your old control, I don't think Mach3 will like them for a start.
Graham
Logged
Without engineers the world stops
BR549
6,965
Re: g2 stops program when running
«
Reply #7 on:
November 29, 2010, 11:08:48 AM »
What I meant was it does not appear to acutally be part of a program that actually cuts something.
Here is a shot of the toolpath as drawn in Mach3
Logged
Luslugger
6
Re: g2 stops program when running
«
Reply #8 on:
November 29, 2010, 12:11:45 PM »
That is what I would like my Mach to look like. The circles don't look on the same centerline but they are. It is one interpolated circle with another interpolated spiral in the center. Did you get that jpg with software or a camera?
Logged
BR549
6,965
Re: g2 stops program when running
«
Reply #9 on:
November 29, 2010, 01:56:09 PM »
That Jpg is a screen print saved in PAINT then trimmed and saved as a JPG.
As Graham mentioned as well Mach will not process the P values you used in the arc
(;-) TP
Logged
Print
Pages:
1
2
»
Go Up
« previous
next »