I really need the quantity of IO that Grex or another modbus can
give. I also need the feedback from encoders, but would like to try
steppers with feedback. I already have the steppers with encoders
ordered (5-34 frame and 3-23 frame, one spare of each). Is the mach4
operable enough with the Grex to actually run a machine? As far as
safety issues, My machine travel is approx. 1" by 2" with a feed rate
of approx. 10 ipm or less and the entire setup totally enclosed. I
understand that the "end user" version of G100 is the same as the G101
+ G102, but do I need to wait for the software to possible become more
stable, therefore no hury since the G100 isn't actually shipping yet?
(No disrespect or digs intended)
anxiously waiting,
T. Byrd