Hello Guest it is December 05, 2021, 11:24:27 AM

Author Topic: Motors work right when windows starts up and then stop after a minute or two  (Read 2225 times)

0 Members and 1 Guest are viewing this topic.

I recently bought mach 3 and a Fireball cnc maching with motors from Probotix.  I am having trouble getting the motors to run. 

If I start up windows and fire up mach 3 right away and jog the motors they run perfectly and nice and smooth.  Then after a little while they start making alot of noise and move in jerky steps.  I tried going through the windows xp setup on the machsupport website and it still acts weird.

I am running it on a desktop computer with a 1.8ghz AMD Athlon XP 2200 processor and 1GB of RAM.

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
What does the driver test look like when you run it? What kernel do you have set?
Hood

Offline RICH

*
  • *
  •  7,419 7,419
    • View Profile
Post info on the motor drives  or controller you are using.
RICH

Offline Tweakie.CNC

*
  • *
  •  8,865 8,865
  • Super Kitty
    • View Profile
    • Tweakie.CNC
dlbjcksn,

Is anything getting hot ?

Tweakie.
KEEP SAFE !