Hello Guest it is March 19, 2024, 02:10:47 AM

Author Topic: mach 3 mill. can read a few lines g code.  (Read 6901 times)

0 Members and 1 Guest are viewing this topic.

mach 3 mill. can read a few lines g code.
« on: November 06, 2010, 12:09:05 AM »
mach 3 mill. can read a few lines g code.
Re: mach 3 mill. can read a few lines g code.
« Reply #1 on: November 06, 2010, 01:58:33 AM »
mach 3 mill. g code can be read up to 7000 lines or not.
 ???
Re: mach 3 mill. can read a few lines g code.
« Reply #2 on: November 06, 2010, 02:08:05 AM »
Without a license, 500 lines max

With licensed software, up to million

Jeff

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: mach 3 mill. can read a few lines g code.
« Reply #3 on: November 06, 2010, 04:32:17 AM »
Sorry to be picky but its reported as 10,000,000 lines with a licensed copy, wonder if anyone has ever got near that ;D

Hood
Re: mach 3 mill. can read a few lines g code.
« Reply #4 on: November 06, 2010, 10:37:49 AM »
I have the license, but I'll bite work of over 5000 line. Program. Runs very slowly, or sometimes error to it, the problem is caused by something, I forgot to mention to the mach3 mill with milling maching center, sometimes it works the number of lines over 5000-7000 Am ??? line
Re: mach 3 mill. can read a few lines g code.
« Reply #5 on: November 06, 2010, 10:45:44 AM »
Or that I had my computer is too slow
Re: mach 3 mill. can read a few lines g code.
« Reply #6 on: November 06, 2010, 10:50:52 AM »
I wanted to put mach3. Cnc machine to wake machines living a low-cost living with cncroom.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: mach 3 mill. can read a few lines g code.
« Reply #7 on: November 06, 2010, 11:38:33 AM »
Try turning off the toolpath display.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: mach 3 mill. can read a few lines g code.
« Reply #8 on: November 11, 2010, 01:26:36 AM »
I have run about 90,000 lines of code a couple times.