Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: the_kop on November 06, 2010, 12:09:05 AM

Title: mach 3 mill. can read a few lines g code.
Post by: the_kop on November 06, 2010, 12:09:05 AM

mach 3 mill. can read a few lines g code.

Title: Re: mach 3 mill. can read a few lines g code.
Post by: the_kop on November 06, 2010, 01:58:33 AM

mach 3 mill. g code can be read up to 7000 lines or not.
 ???

Title: Re: mach 3 mill. can read a few lines g code.
Post by: ostie01 on November 06, 2010, 02:08:05 AM

Without a license, 500 lines max

With licensed software, up to million

Jeff

Title: Re: mach 3 mill. can read a few lines g code.
Post by: Hood on November 06, 2010, 04:32:17 AM

Sorry to be picky but its reported as 10,000,000 lines with a licensed copy, wonder if anyone has ever got near that ;D

Hood

Title: Re: mach 3 mill. can read a few lines g code.
Post by: the_kop on November 06, 2010, 10:37:49 AM

I have the license, but I'll bite work of over 5000 line. Program. Runs very slowly, or sometimes error to it, the problem is caused by something, I forgot to mention to the mach3 mill with milling maching center, sometimes it works the number of lines over 5000-7000 Am ??? line

Title: Re: mach 3 mill. can read a few lines g code.
Post by: the_kop on November 06, 2010, 10:45:44 AM

Or that I had my computer is too slow

Title: Re: mach 3 mill. can read a few lines g code.
Post by: the_kop on November 06, 2010, 10:50:52 AM

I wanted to put mach3. Cnc machine to wake machines living a low-cost living with cncroom.

Title: Re: mach 3 mill. can read a few lines g code.
Post by: ger21 on November 06, 2010, 11:38:33 AM

Try turning off the toolpath display.

Title: Re: mach 3 mill. can read a few lines g code.
Post by: Bob La Londe on November 11, 2010, 01:26:36 AM

I have run about 90,000 lines of code a couple times.