Hello Guest it is November 22, 2019, 10:02:06 AM

Author Topic: Probing Software  (Read 1856 times)

0 Members and 1 Guest are viewing this topic.

Probing Software
« on: October 18, 2010, 01:43:39 PM »
Hi I am about to purchase a Probe from Arnie,  can anyone point me in the right direction for the best software to use with the Probe. Also a bit confused as to the procedure in using the probe, does the software automatically reference the sides of the component you want to probe etc. Any help and suggestions would be appreciated. Thanks.

Offline BR549

*
  •  6,916 6,916
    • View Profile
Re: Probing Software
« Reply #1 on: October 18, 2010, 03:59:24 PM »
So far there is NOT a generic software package to do the job.

There are MANY macros and  no wizards that I am aware of, and SOME screensets that do certain probing functions BUT not a total generic package that is used with Mach.

Sorry, Probing has not gotten that far in Mach yet. 

 (;-) TP
« Last Edit: October 18, 2010, 04:02:36 PM by BR549 »
Re: Probing Software
« Reply #2 on: October 18, 2010, 04:14:06 PM »
You might want to take a look at the MachStdMill screen set - it includes built in support for many common probing operations
info can be found at
http://www.machsupport.com/forum/index.php/topic,15291.0.html

Dave
Author of the MachStdMill Extensions for Mach3
www.CalypsoVentures.com