Hello Guest it is November 15, 2019, 06:12:07 PM

Author Topic: 4th Axis Fun  (Read 4692 times)

0 Members and 1 Guest are viewing this topic.

Offline Haik

*
  •  71 71
  • MachUser
    • View Profile
4th Axis Fun
« on: October 13, 2010, 02:20:04 AM »
A while back I made Pepper Mills.  Here's one such getting cut...
http://www.youtube.com/watch?v=nIfhA5biIvE

Also, there's some CAD/CAM info on this project at http://dwell.leveragesoftware.com/blog_post_view.aspx?BlogPostID=75279361e91549f7b57756e828a677df

The machine is a Thermwood C5 and the 4th Axis I put together myself from a 6" rotary table and a hefty nema 34 motor. All is run by Mach3 via a SmoothStepper. The wood is maple.  Enjoy!

-Haik

Offline Tweakie.CNC

*
  • *
  •  7,997 7,997
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: 4th Axis Fun
« Reply #1 on: October 13, 2010, 02:46:50 AM »
That's great Haik - I can almost smell the steak.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.