Hello Guest it is October 23, 2021, 05:38:31 AM

Author Topic: speeding up digitizing wizard G 31 has long pause when scanning.  (Read 1554 times)

0 Members and 1 Guest are viewing this topic.

speeding up digitizing wizard G 31 has long pause when scanning.
« on: September 25, 2010, 01:33:22 PM »
The digitizing wizard (both the 3 axis and 4 axis version) use the G31 command.

I've built an axillary high speed Z axis that is belt driven and is dedicated to my touch probe.

The problem I'm having is I still can't get any speed out of the scanning process because the scanning routine stops and pauses for at least a full second before it retracts the probe and moves to the next position.

Anyway to get a shorter pause period?  Also noticed the probe moves much faster on retract than it does on the way down. I'd like to change these values as well.

Any help greatly appreciated.

Tristar