Hello Guest it is January 26, 2020, 04:16:32 PM

Author Topic: Trouble on Z axis value  (Read 1568 times)

0 Members and 1 Guest are viewing this topic.

Trouble on Z axis value
« on: September 14, 2010, 04:38:51 AM »
Hello all;

I meet a trouble on my Mach 3 driven mini router.
When I key in 10mm on Z- for example, the machine only moves 5mm Z-.
Z axis always moves half of programmed value, either in part program or IMD command.
I never met such problem until now; I guess it is a MACH trouble and not machine.
Has anybody met this problem yet ?
Maybe someone should help me ?

Thanks very very much in advance.
William.
Re: Trouble on Z axis value
« Reply #1 on: September 14, 2010, 04:56:02 AM »
check your scale in axis
**Even a clock that does not work is right twice a day**