Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: William on September 14, 2010, 04:38:51 AM
-
Hello all;
I meet a trouble on my Mach 3 driven mini router.
When I key in 10mm on Z- for example, the machine only moves 5mm Z-.
Z axis always moves half of programmed value, either in part program or IMD command.
I never met such problem until now; I guess it is a MACH trouble and not machine.
Has anybody met this problem yet ?
Maybe someone should help me ?
Thanks very very much in advance.
William.
-
check your scale in axis