I've now got all 4 Axis running under Mach3 on the
Kitchen table using the P4 3.2Ghz Machine; works fine.
I'm using one of the Chinese 4 Axis TB6560 boards, which took a bit of fiddling around with Port Numbering to get right.
My question this time;
Reading through the Mach3 Docs, I was interested enough in the USB Game Pad Jogging System to try it.
I'm using a Logitech Game Pad which works just fine after using the 'Keygrabber' setup in the Mach3 Directory.
However, when I start Mach3 it doesn't work . . .
Turn Mach3 off, Start Keygrabber and use the 'Start Mach3' button, and it all works again, but if I start up my Mill Profile directly, it doesn't.
I'm sure that someone else has had this issue - comments please?
.