This has got me stumped!!!
Step 1) I have a customer who runs Mach3 and his computer is starting to have problems.
He bought a new system and I installed Mach3 and moved the profile and the liscense. This
results in a setup that moves the Axis counters on-screen but will not work through the parallel
port. I checked the BIOS and the Device Manager.Everything is enabled and the port base I/O
address is 378 with no conflicts. This is the latest version of Mach3 running on an XP Desktop
system.
Step 2) I was puzzled by this so I brought my home system down to the customers site. I
brought over the profile (runs on the customers system) to my system. The results were the
same as in Step 1. All the indications and settings say that all is well. The steppers do not
lock up and there is no apparent communication with the parallel port. THIS IS A RUNNING
SYSTEM !
What am I missing