hey guys
i am very new to all this and cant get my homemade cnc machine (with a Toshiba tb6560 and motors bought of ebay) working on mach3. i have tried to follow the video tuts but still no joy so heres what i've done.
first off the wiring for the motors black to A+, green to A-, red to B+, blue to B-, if this is wrong can you please let me know as i had to search the net to find it (the ebay seller tried to be helpful but really didn't know their wears).
second i have put all the inputs into mach3 parallel port address, Hz, motor outputs, input signals, and output signals.
i then press the RESET button in mach3 and everything goes well in Diagnostics page
i then load gcode of roadrunner and then hit CYCLE START button and everything starts on the program but nothing happens with my motors
any help would be great please im truly stumped and have been trying to get it working for a week now
cheers
Ben