Hello Guest it is April 18, 2024, 06:12:38 PM
Profile Guest
« previous next »
Pages: « 1 2   Go Down

Author Topic: CamBam Gcode problems  (Read 8344 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeff_Birt

*
  • 1,107 1,107
    • View Profile
    • Soigeneris
Re: CamBam Gcode problems
« Reply #10 on: September 16, 2010, 08:39:05 AM »
Also make sure you select the 'mach 3' post processor in CamBam. The generic one works 99% of the time, but the Mach one is fine tuned to play well with Mach's defaults.
Logged
Happy machining , Jeff Birt
 

Offline ger21

*
  • *
  • 6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: CamBam Gcode problems
« Reply #11 on: September 16, 2010, 11:40:06 AM »
I and J are the XY coordinates of the arc center. Absolute mode uses the exact coordinates. Incremental specifies the center relative to the start of the arc.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Jeff K

*
  • 16 16
    • View Profile
Re: CamBam Gcode problems
« Reply #12 on: September 16, 2010, 08:43:45 PM »
Thanks to all who responded. I still have a lot to learn, but I'm getting there. I appreciate all your help.

Best regards to all.

Jeff
Logged
Pages: « 1 2   Go Up
« previous next »