Hi All,

All your collective suggestions directed me to notice that my charge pump LED was on when Reset was enabled and off when Reset was at fault. I fed the blinking LED's on my control panel with the NC points of the relay, and I have the effect I was looking for.  When the reset is at fault, my LEDs are powered on (no charge pump signal) and when the Reset is enabled (reset), the LED's are powered off (charge pump signal activates relay). Thanks again to all.

Johnv

LOL - NOW you tell us you're using a charge pump circuit.... aaaaaaaaaaaaaaggggggggggggggghhhhhhhhhhhh

only kidding - glad you got it sorted.

Cheers

Ian