Hello Guest it is March 28, 2024, 05:29:03 PM

Author Topic: New 'mini' MPG for Override controls  (Read 18249 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeff_Birt

*
  •  1,107 1,107
    • View Profile
    • Soigeneris
New 'mini' MPG for Override controls
« on: June 05, 2010, 10:58:20 PM »
I have a new MPG control available on my website now: http://soigeneris.com/CNCMPG_Controls.aspx . It measures about 1.5" x 1.0" x 0.5" and is intended for use as an over ride control. It comes with the mounting hardware and 1" knob PLUS a plug-in for Mach 3. The plug-in adds velocity sensitive acceleration to the control so the amount of movement it reports is dependant upon how fast you are turning it (sort of how your mouse works.) They work great and are very easy to configure. You can download the users manual for more complete information.
Happy machining , Jeff Birt
 

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: New 'mini' MPG for Override controls
« Reply #1 on: June 06, 2010, 08:29:03 AM »
Is that limited to 5V, or can it be used with 24V inputs?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Jeff_Birt

*
  •  1,107 1,107
    • View Profile
    • Soigeneris
Re: New 'mini' MPG for Override controls
« Reply #2 on: June 06, 2010, 09:32:54 AM »
The important tihng is to insure that it will never have to switch more than 0.1w. Most inputs are high impedance, i.e. draw very little current, so this is not a problem, at 24V you would have a limit of 4ma. What type of BOB are you working with?
Happy machining , Jeff Birt
 
Re: New 'mini' MPG for Override controls
« Reply #3 on: October 13, 2016, 10:01:38 PM »
Hello, Jeff,

This is Alex He from China.
I sent you an email. Please check and give me a reply, have a nice day. Thanks

Offline Jeff_Birt

*
  •  1,107 1,107
    • View Profile
    • Soigeneris
Re: New 'mini' MPG for Override controls
« Reply #4 on: October 14, 2016, 08:36:10 AM »
Alex can you resend please? I installed a new spam filter due to the large amount of spam I am getting and your email must have gotten caught. Please put MPG in subject line.
Happy machining , Jeff Birt
 
Re: New 'mini' MPG for Override controls
« Reply #5 on: October 17, 2016, 09:28:21 PM »
Hi, Mr Jeff,

Sorry to reply you so late. I sent you an email again. Please check it