Hello Guest it is December 15, 2019, 06:02:04 PM

Author Topic: SS losing Data on Long NC Files  (Read 2929 times)

0 Members and 1 Guest are viewing this topic.

SS losing Data on Long NC Files
« on: May 17, 2010, 05:41:06 PM »
Has anyone had problems with the SS and running extremely long nc files?  I try to run a long nc file and the SS will lose data at the very begining of the program. I cut the NC file in half and it is running fine.  Does anyone have any idea why this would happen? I does not happen on shorter files. :-\

Thanks,
Tom

Offline Jeff_Birt

*
  •  1,107 1,107
    • View Profile
    • Soigeneris
Re: SS losing Data on Long NC Files
« Reply #1 on: May 18, 2010, 02:55:42 AM »
Really large files can give Mach fits. You can turn off the toolpath display to free up some processor resources. Also, don't try to run a file off a network drive. Brian has moved the graphics to its own thread in Mach 4 so everyone shoudl see a dramatic improvmetn with large file but it will be months before V4 is out.
Happy machining , Jeff Birt
 
Re: SS losing Data on Long NC Files
« Reply #2 on: May 18, 2010, 04:07:32 PM »
Thank you Jeff, that seems to work, Looking forward to Mach 4

Tom