Hello Guest it is December 14, 2019, 12:52:21 PM

Author Topic: Need help with MPG and Smoothstepper  (Read 3230 times)

0 Members and 1 Guest are viewing this topic.

Need help with MPG and Smoothstepper
« on: April 30, 2010, 12:45:23 PM »
I just got a MPG2 from Kelling.  I have it hooked up to the LPT2 on the smooth stepper. I have it set to the setting that I could find on the CNC4pc Site, I am using the c-10 BOB. I cant even get the power light on the MPG to come on. I am really lost and could use some direction.
I am including my XML file.

Thanks,
Tom
Re: Need help with MPG and Smoothstepper
« Reply #1 on: April 30, 2010, 06:39:11 PM »
Tom,

I think you need to add the C22 – Pendant Interface Board: http://www.cnc4pc.com/Store/osc/product_info.php?cPath=40&products_id=159.

Keiling has the C22 board, I believe he should have shipped the pendant with the board.

Then follow these instructions: http://cnc4pc.com/Tech_Docs/guide_for_MPG4_over_LPT2.htm.

Arturo Duncan
http://cnc4pc.com