Hello Guest it is December 14, 2019, 02:10:53 AM

Author Topic: SET UP A AXIS IN ONE DIRECTION  (Read 7490 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,380 7,380
    • View Profile
Re: SET UP A AXIS IN ONE DIRECTION
« Reply #10 on: April 01, 2010, 03:16:02 PM »
RNE,
Play with the velocity setting and accel , start low and gradualy increase until the stepper starts to skip then back off some.
RICH
Re: SET UP A AXIS IN ONE DIRECTION
« Reply #11 on: April 01, 2010, 03:34:51 PM »
Rich thanks for your answer.

But I have done that and feed is not over 29000 never.
I think thas is because my steps are 200 *4 = 800
too much pulses to get a Hig speed.

Regards

Rene