Russ,
got a reply from Wojtek at CS-LAB,
Question asked was
"Hi Wojtek,
can you tell me, is rigid tapping possible with the IP-S & IP-A and the Enc
module when using a VFD to control the spindle? "
The reply was
"Hi,
Yes, sure it is"
Short and sweet but my question was asked prior to all the extra info required by some
I have asked for some info on how closely the Z will be observed or whether that would be dependant on the VFD and its setup.
I have also asked if peck tapping is possible with a VFD.
Hood