Hello Guest it is August 25, 2019, 02:47:45 PM

Author Topic: Jog Button Uni-directional in Turn  (Read 4289 times)

0 Members and 1 Guest are viewing this topic.

Re: Jog Button Uni-directional in Turn
« Reply #10 on: February 11, 2010, 11:59:43 AM »
Phil,

Thanks. That sounds fascinating and exactly what I would like to be able to do. I will dig into it over the next few days and hopefully not make to much of hash out of it What kind of MPG do you use?  Frank
Re: Jog Button Uni-directional in Turn
« Reply #11 on: February 11, 2010, 12:34:07 PM »
Phil,

Thanks. That sounds fascinating and exactly what I would like to be able to do. I will dig into it over the next few days and hopefully not make to much of hash out of it What kind of MPG do you use?  Frank


Frank,

You again.

I use these http://www.cnc4pc.com/Store/osc/product_info.php?cPath=40&products_id=207

I just need handles to turn, they are semi fixed to the lathe so i can turn both at once.

Phil
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable