Hello Guest it is March 19, 2024, 07:17:32 AM

Author Topic: Motherboard for Mach3  (Read 3132 times)

0 Members and 1 Guest are viewing this topic.

Motherboard for Mach3
« on: February 04, 2010, 10:29:58 AM »
Advise, please, model motherboard which well works with Mach3 (LPT port), without glitch.

Thanks!

Offline Tweakie.CNC

*
  • *
  •  9,195 9,195
  • Super Kitty
    • View Profile
Re: Motherboard for Mach3
« Reply #1 on: February 04, 2010, 12:20:23 PM »
The one I use is the GA-8 SIMLH P4 Titan-DDR Motherboard which works perfectly with Mach and my machines.
This is an old board which was bought second hand on ebay - most new boards do not have the parallel port nowdays (although I do use a PCI parallel port card the onboard port is still handy to have).

Tweakie.
PEACE

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Motherboard for Mach3
« Reply #2 on: February 04, 2010, 01:34:38 PM »
Here are the pc components which were used for my new Mach3 pc. The pulse fequency is solid and no problems
at all.
Here are some basics:
- Asus motherboard - M2N68-AM SE2
- 2 GIG Ram
- AMD  64X2 Dual Core Processor 5200+ 2.7 Ghz
- Asus graphics Card - EN9600GSO
- Rosewill PCI pp card - RC302

Works for me anyway and didn't cost an arm and a leg to have it put together.
You may want to consider a dual PP card.
RICH