Hello Guest it is January 28, 2020, 08:10:29 AM

Author Topic: CAN NOT RUN MACH3  (Read 2024 times)

0 Members and 1 Guest are viewing this topic.

CAN NOT RUN MACH3
« on: January 24, 2010, 01:57:10 PM »
I am new user to mach3 ,i made the driver circuit for stepper motor and tested it with a VISUAL BASIC program i designed by PLL PORT pin 2--->step pulse , pin 6 -->dir pulse , and worked efficiently ,but when i ran MACH3 the motor didn't work.is there something error