Hello Guest it is November 12, 2019, 06:32:12 PM

Author Topic: EmcoTurn140 test cut  (Read 4845 times)

0 Members and 1 Guest are viewing this topic.

Offline Monty

*
  •  116 116
    • View Profile
EmcoTurn140 test cut
« on: January 23, 2010, 08:34:14 PM »
Here is a video of the EmcoTurn140 making the first test cut.

http://www.youtube.com/watch?v=pYYkp1wkSBY

Sorry about the unstable camera. I had to switch hands to make sure the Estop was covered.

It still have a momentary panic whenever the turret takes off for the spindle. I'll get some better quality video after I have a good program worked out with the tool changer in action.

Monty

Offline RICH

*
  • *
  •  7,370 7,370
    • View Profile
Re: EmcoTurn140 test cut
« Reply #1 on: January 23, 2010, 09:30:29 PM »
Looking good, the machine is stable and that what's counts.
RICH
Re: EmcoTurn140 test cut
« Reply #2 on: January 23, 2010, 10:44:56 PM »
I would love to have one like this.

Very good looking, thanks to share.


Jeff

Offline Monty

*
  •  116 116
    • View Profile
Re: EmcoTurn140 test cut
« Reply #3 on: January 27, 2010, 07:19:32 PM »