Hello Guest it is March 29, 2024, 10:13:50 AM

Author Topic: CamBam and Mach3  (Read 2761 times)

0 Members and 1 Guest are viewing this topic.

CamBam and Mach3
« on: January 10, 2010, 12:18:00 AM »
i am using CamBam to create Gcode for mach3 from dxf files. but every time I try to load the .nc file from CamBam I get extra circles added. sorry if this is a newb question but this is my first cnc. the same files open fine in emc2 but I want to use mach3. any help would be great
thanks
Jon
Re: CamBam and Mach3
« Reply #1 on: January 10, 2010, 12:27:06 AM »
UPDATE

ok I change IJ mode from absolute to incremental. should I have distance mode set to incremental also? or should I leave it as absolute?

thanks

Jon

Offline Sam

*
  • *
  •  987 987
    • View Profile
    • hillbillyhilton.com
Re: CamBam and Mach3
« Reply #2 on: January 10, 2010, 01:34:48 AM »
Leave it as absolute.
"CONFIDENCE: it's the feeling you experience before you fully understand the situation."