Hello
Guest
it is
April 26, 2024, 04:41:25 AM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
Mach3 Tool Path Screen
« previous
next »
Print
Pages:
1
2
»
Go Down
Author
Topic: Mach3 Tool Path Screen (Read 8870 times)
0 Members and 1 Guest are viewing this topic.
NormB
169
Norm
Mach3 Tool Path Screen
«
on:
January 05, 2010, 10:45:15 AM »
I am using the standard screens set up in Mach3 adn when I start to run a program the tool is moving and it shows light blue dots not a green line as in Mach3 how can I change this so I can see the tool on te work piece?
Logged
Hood
25,835
Carnoustie, Scotland
Re: Mach3 Tool Path Screen
«
Reply #1 on:
January 05, 2010, 11:13:14 AM »
It will depend on the feedrate you have, also whether your code has longish lines or very short lines. If your code is made of lots of small segments then you will see green dots. This is due to the graphics update and not much you can do about it except for wait until Rev4 as it should be much better in that respect.
Hood
Logged
NormB
169
Norm
Re: Mach3 Tool Path Screen
«
Reply #2 on:
January 05, 2010, 12:40:41 PM »
thank you for the rresponse, I was hoping for better but understand. I do have some long lines but they too show dots not a solid line. You can sort of see where the tool had been but it's difficult. I guess nothing that can't be dealt with.
Logged
ger21
6,295
Re: Mach3 Tool Path Screen
«
Reply #3 on:
January 05, 2010, 01:13:14 PM »
I've seen both the dots, and the full green line. Seems like they occur with different versions of Mach3??
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Hood
25,835
Carnoustie, Scotland
Re: Mach3 Tool Path Screen
«
Reply #4 on:
January 05, 2010, 02:03:59 PM »
What feedrates do you have when you are seeing the dots?
Hood
Logged
NormB
169
Norm
Re: Mach3 Tool Path Screen
«
Reply #5 on:
January 05, 2010, 02:28:10 PM »
I am usually running between 50 and 100......... never higher than 100 and for a clean cut usually 50. I have never seen a green line only the dots. I have the latest version of Mach3 the one just released I think 2.64 or so.
Logged
ger21
6,295
Re: Mach3 Tool Path Screen
«
Reply #6 on:
January 05, 2010, 02:34:57 PM »
2.64 is well over a year old. I'm running 3.42.20 on my machine, and have 3.43 on this PC, and both have solid green lines. I haven't seen the dotted lines in a long time, but I have seen them on older versions.
Logged
Gerry
2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
NormB
169
Norm
Re: Mach3 Tool Path Screen
«
Reply #7 on:
January 05, 2010, 02:41:06 PM »
Sorry, just checked and I am running Version R3.042.032 I think I may have been confused with mach2 anyway this is the version giving me the dots. Both copies the release prior to this one and this one both do the same.
Logged
Hood
25,835
Carnoustie, Scotland
Re: Mach3 Tool Path Screen
«
Reply #8 on:
January 05, 2010, 02:43:28 PM »
Can you attach your xml and your code and I will have a look and see what happens here.
Hood
Logged
NormB
169
Norm
Re: Mach3 Tool Path Screen
«
Reply #9 on:
January 05, 2010, 02:46:19 PM »
I can send the code what is the XML?
Logged
Print
Pages:
1
2
»
Go Up
« previous
next »