Hello Guest it is November 15, 2019, 05:57:07 PM

Author Topic: Y Axis not reversing...  (Read 1776 times)

0 Members and 1 Guest are viewing this topic.

Offline BarryB

*
  •  267 267
    • View Profile
Y Axis not reversing...
« on: January 01, 2010, 02:38:56 PM »
Hello, I have all my axis behaving normally, except for my Y axis.  When I press the up arrow key, it's moving in the Y minus direction, the down arrow it moves in the Y plus direction.  Under homing/limits, I've tried clicking on reversing Y, only this doesn't do anything.  With the other axis, it looks like it does reverse them, but not with Y.  I'm drawing a blank here.  Suggestions?

Barry

Offline BarryB

*
  •  267 267
    • View Profile
Re: Y Axis not reversing...
« Reply #1 on: January 01, 2010, 03:03:52 PM »
Restarting Mach3 cleared up that problem.  I do have another issue, but I'll save that for a separate e-mail.