Hello Guest it is March 28, 2024, 06:38:35 AM

Author Topic: Peck Drilling macros for the Lathe  (Read 14902 times)

0 Members and 1 Guest are viewing this topic.

melee

*
Re: Peck Drilling macros
« Reply #10 on: December 18, 2009, 03:16:31 AM »
You're welcome Rich

Always takes someone else's input to properly test something, so thanks for sticking with me.

The indexing lathe conversion of yours is very interesting. 
If you can combine indexing ability with full spindle functionality, you will have a very versatile machine.

regards

Melee
Re: Peck Drilling macros for the Lathe
« Reply #11 on: December 24, 2009, 03:01:16 AM »
You're welcome Rich

Always takes someone else's input to properly test something, so thanks for sticking with me.

regards

Melee

This is why his avatar is now the bug killer. Justly deserved if I do say so myself.

Mike
We never have the time or money to do it right the first time, but we somehow manage to do it twice and then spend the money to get it right.
Re: Peck Drilling macros for the Lathe
« Reply #12 on: February 05, 2010, 06:05:37 PM »
Hi all,

This is my way of thanking publically Mick for his help in writing peck drilling macros that are easy to implement and use and work great in Mach3.

In the video at this link, there is a spot drill and deep drill routing using Mick's macros.

http://www.youtube.com/watch?v=9kRHpfDiRsE

Regards

chrisjh

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Peck Drilling macros for the Lathe
« Reply #13 on: February 05, 2010, 06:47:04 PM »
Hi Chris,

Any chance you could repost these macros? It seems Melee's link is not working for downloading these anymore.

Thanks,
Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Peck Drilling macros for the Lathe
« Reply #14 on: February 05, 2010, 11:18:22 PM »
Dave,
I have them and cam post them if you wish.
Where do you want them?
They worked great on the lathe nut i never tried the ones for the mil.
RICH
Re: Peck Drilling macros for the Lathe
« Reply #15 on: February 06, 2010, 03:51:08 AM »
Hi Dave,

I have attached Mick's macros published 30Dec09.

Regards

Chrisjh

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Peck Drilling macros for the Lathe
« Reply #16 on: February 06, 2010, 07:13:14 AM »
Thanks fellas and thanks chris for posting these.

I'm actually planning a multi-tool setup much like in the video shown earlier in this thread, so these will definitely come in handy down the road.

Have a great day-
Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)