Hello Guest it is April 16, 2024, 12:29:53 AM
Profile Guest
« previous next »
Pages: « 1 2 3   Go Down

Author Topic: Constant Surface Speed On The Lathe  (Read 16304 times)

0 Members and 1 Guest are viewing this topic.

Offline M250cnc

*
  • 591 591
    • View Profile
Re: Constant Surface Speed On The Lathe
« Reply #20 on: December 16, 2009, 05:58:57 AM »
Logged
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Constant Surface Speed On The Lathe
« Reply #21 on: December 30, 2009, 07:40:36 AM »
Just an update.
Looks like it is Mach that is screwed on this rather than the SmoothStepper, asked a few people on the Yahoo group and Steve Blackmore said it works fine in the old version of Mach he uses with the PP but Simon Daykin has tested again using the PP with a newer version and it does the feed per rev funny things that we are seeing with the SmoothStepper.

Hood
Logged

Offline M250cnc

*
  • 591 591
    • View Profile
Re: Constant Surface Speed On The Lathe
« Reply #22 on: December 30, 2009, 09:23:34 AM »
Hood, thanks for the heads up.

I did try with no luck clicking the speed reduction dro while facing, made no difference.

Logged
The Good Thing About Mach3, Is It's very Configurable

The Bad Thing About Mach3, Is It's Too Configurable
Pages: « 1 2 3   Go Up
« previous next »