Hi all,
I just finished my first screen set for Mach 3. It is for a 2 axis lathe. Very very basic. My goal was to create a screen
that would control the machine completely from the keyboard with only one screen. This is not fancy at all but works
very well, at least on my machine. Maybe some one else can use it also. I used "F" keys. Other keys are designated
with a single quote. Exm: 'Regen uses key R. 'Spindle on/off uses key S etc., < feed rate lower >feed rate higher etc.
Al
Please see my latest posting for the current version. 9/15/06