Hello Guest it is March 29, 2024, 04:46:46 AM

Author Topic: Looking for some one to make me some small gears:  (Read 2441 times)

0 Members and 1 Guest are viewing this topic.

Looking for some one to make me some small gears:
« on: November 22, 2009, 01:29:46 AM »
The subject about said it all. I use electric turkey knifes in my business to cut foam. These knifes have a wormgear and a drive gear the drive gear is made out of Nylon and doesn't last very long I have a lot of samples with one side striped if anyonewould like to play with this project please let me know and I will get a hold of you off line Thanks

Ken
Re: Looking for some one to make me some small gears:
« Reply #1 on: December 31, 2009, 06:50:28 PM »
Hi Ken,

I could likely make a small mold for you and make these gears in the 1000's .... if you are interested in doing something like this let me know.

I am a mold maker by trade and have all the CAD/CAM/CNC experience necessary to reverse engineer the parts, design and build the required tooling to make you these parts.

My name is Brian... Let me know.