Hello Guest it is March 28, 2024, 12:13:00 PM

Author Topic: mach 3 software problems or gecko problems  (Read 3146 times)

0 Members and 1 Guest are viewing this topic.

mach 3 software problems or gecko problems
« on: November 17, 2009, 10:36:51 PM »
hi  i went threw the video on how to install the software and every thing look fine but when you jog the  stepper motors  only the x axle works it goes only to the left but it doest not go back to the right  y axes works but it does not return back to home and the z does not work and a axes at all i thought i might be the program or the gecko 540 controller box  please help !!!!  and every thing i have is brand new ...

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: mach 3 software problems or gecko problems
« Reply #1 on: November 18, 2009, 02:33:08 AM »
Sounds like either you have the geckos wired wrong or possibly you have the wrong pins asigned in Mach for the motors.
Hood
Re: mach 3 software problems or gecko problems
« Reply #2 on: November 18, 2009, 01:57:42 PM »
thank you i had to reinstall the software now it work great thank you again