Hello Guest it is September 17, 2019, 05:41:35 PM

Author Topic: Lathe turret, VB, PLC, MODBUS, Position  (Read 12215 times)

0 Members and 1 Guest are viewing this topic.

Re: Lathe turret, VB, PLC, MODBUS, Position
« Reply #30 on: November 18, 2009, 06:30:10 AM »
Hi Hood,

I had the prototype live on air a few weeks ago. I don't have any other info other than this thread.

http://www.machsupport.com/forum/index.php/topic,12968.0.html

Cheers,

Peter.
----------------------------------------------------
Homann Designs
http://www.homanndesigns.com
email: peter at homanndesigns.com
Re: Lathe turret, VB, PLC, MODBUS, Position
« Reply #31 on: November 21, 2009, 02:17:35 PM »
Hi All, just a quick update on the tool changer, it is working really well!  I have  it up and running with everything but the clamp going, I don't yet have all the hydraulics installed and ready to go.  I've attached the macro just for fun, I had a good time writing it, and it is really cool to see it working :-)

Thanks for all your great help!!
Dustin