Whoops, I celebrated too soon. Still no luck. Here's what I'm doing, bear with me because my pc tower is not hooked to the internet and I have no screen shots. I made a simple drawing in my Acad 2010( which is fully licensed and has no issues). I go to Save as, and the default is Dwf file, but gives the options of saving to different Dxf formats. The selection it gives me to choose from for the dxf type formats are: Acad 2010, 2007 and 2007LT, 2004 and 2004LT, 2000 and 2000 LT, and R12 LT2. I did not see R14 anywhere on the options. I saved it in each of these formats at one point or another in my many attempts to pull up my drawing in L-Cam with no success. I then tried Export, and didn't see where I could export it to a dxf format(mabye I didn't look hard enough), but for the heck of it, exported it to bmp. format, and it did pick it up in L-Cam.( though it had some pieces of the drawing missing. I have been closing out my Acad and saving the file change after each attempt( as I have heard that closing it out is necessary for L-Cam load) Please can someone give me a walkthrough on simply how to take a cad drawing and bring it up on Lazycam?